Email: lixifirm@outlook                       whatsapp:+8618273793022

Why the SDS Matters

An SDS is a standardized document required under regulations such as OSHA (Occupational Safety and Health Administration) in the United States and REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) in the European Union.

For manganese sulfate, the SDS is critical because:

  • It provides hazard identification for workers in agriculture, chemical plants, and laboratories.

  • It ensures compliance with safety and environmental regulations.

  • It helps organizations train employees on proper handling and emergency response.

Key Safety Information from the SD

Hazard Identification

  • GHS Classification:

    • Specific target organ toxicity (repeated exposure), Category 2

    • Eye damage, Category 1

    • Chronic aquatic toxicity, Category 2

  • Signal Word: Warning

  • Hazard Statements:

    • May cause damage to organs through prolonged or repeated exposure

    • Causes serious eye damage

    • Toxic to aquatic life with long-lasting effects

  • Precautionary Measures:

    • Avoid breathing dust or vapors

    • Wear protective gloves and eye/face protection

    • Do not eat, drink, or smoke while handling

    • Prevent release to the environment

    • Store locked up and dispose of material properly

Composition and Ingredients

  • Substance: Manganese (II) sulfate monohydrate

  • CAS Number: 10034-96-5

  • Purity: 95–100%

First Aid Measures

  • Inhalation: Move to fresh air, clean nasal cavity with water, and seek medical attention if irritation persists.

  • Skin Contact: Remove contaminated clothing and wash skin with mild soap and water.

  • Eye Contact: Rinse with water for several minutes, remove contact lenses if present, and continue rinsing.

  • Ingestion: Rinse mouth, do not induce vomiting, and seek emergency medical help.

  • Possible Symptoms: Chills, fever, nausea, vomiting, coughing, weakness, headaches, and skin irritation

Firefighting Measures

  • Extinguishing Media: Foam, dry powder, CO₂, water spray, or sand.

  • Special Instructions: Use water spray to cool containers and prevent contaminated water from entering drains.

  • Protective Gear: Firefighters should wear NIOSH-approved respiratory protection and protective clothing

Accidental Release Measures

  • Personal Protection: Use gloves, goggles, and avoid creating dust.

  • Environmental Protection: Prevent release into drains or groundwater.

  • Cleanup Methods: Sweep up and place in appropriate containers for disposal or recycling

Handling and Storage

  • Handling:

    • Wash hands after use and before eating or smoking.

    • Provide proper ventilation to avoid dust accumulation.

    • Avoid breathing in particles.

  • Storage:

    • Keep in a cool, dry, and ventilated location.

    • Store away from foodstuffs.

    • Protect from moisture

Exposure Controls and PPE

  • Exposure Limits:

    • ACGIH TWA: 0.2 mg/m³

    • OSHA PEL (Ceiling): 5 mg/m³

  • Engineering Controls:

    • Install eyewash stations and safety showers near work areas.

    • Ensure good ventilation.

  • Personal Protection:

    • Respiratory: Use appropriate masks if ventilation is inadequate.

    • Eyes: Safety goggles or face shields.

    • Hands: Protective gloves.

    • Other: Avoid unnecessary exposure

Physical and Chemical Properties

  • Form: Granular powder

  • Color: White or pale pink

  • Melting Point: 700 °C

  • Solubility: Soluble in water

  • Density: 2.95 g/cm³

Stability and Reactivity

  • Stability: Stable under normal storage conditions.

  • Hazardous Decomposition: Sulfur oxides and manganese oxides may form under fire conditions.

  • Incompatibilities: Strong oxidizing agents and moisture

Toxicological Information

  • Oral LD₅₀ (rat): 2150 mg/kg

  • Health Effects:

    • Eye: Causes severe irritation or damage

    • Skin: May cause irritation

    • Inhalation: May irritate respiratory tract

    • Ingestion: Harmful if swallowed

No evidence suggests manganese sulfate is carcinogenic at levels ≥0.1%

Ecological Information

  • Ecotoxicity: Toxic to aquatic organisms, with potential long-term effects.

  • Environmental Impact: Should not be released into soil or water systems

Disposal Considerations

Dispose of manganese sulfate in accordance with local, state, and federal regulations. Do not allow material to contaminate water sources

Transport Information

  • DOT (U.S.): Not regulated.

  • IMDG (Maritime): UN 3077, Class 9, Marine pollutant.

  • IATA (Air): UN 3077, Class 9

Regulatory Information

  • Not listed under major U.S. hazardous substance regulations such as CERCLA or OSHA regulated substances.

  • Not classified as an extremely hazardous substance under SARA Title III

 

Quick Reference Tables

1. First Aid Measures

Exposure RouteRecommended ActionSymptoms to Watch For
InhalationMove to fresh air, clean nasal cavity with water, seek medical help if irritation persistsCoughing, weakness, headaches
Skin ContactRemove contaminated clothing, wash skin with mild soap and waterSkin irritation
Eye ContactRinse cautiously with water for several minutes, remove contact lenses, continue rinsing, seek medical adviceSerious eye irritation, redness
IngestionRinse mouth, do not induce vomiting, seek emergency medical attentionNausea, vomiting, fever, abdominal pain

2. Personal Protective Equipment (PPE)

Protection TypeRequirement
RespiratoryWear an appropriate mask if ventilation is inadequate
Eyes/FaceChemical goggles or safety glasses with side shields
HandsProtective gloves (chemical-resistant)
Skin/ClothingAvoid unnecessary exposure; wear long-sleeved protective clothing
Workplace ControlsEmergency eyewash fountains and safety showers should be nearby

3. Hazard Classification

Hazard CategoryGHS ClassificationSignal Word
Specific Target Organ Toxicity (Repeated Exposure)Category 2Warning
Eye DamageCategory 1Danger
Aquatic Toxicity (Chronic)Category 2Warning

4. Transport Information

Transport ModeUN NumberClassPacking GroupMarine PollutantProper Shipping Name
DOT (U.S.)Not RegulatedNoNot regulated
IMDGUN 30779IIIYesEnvironmentally hazardous substance, solid, n.o.s. (MnSO₄·H₂O)
IATAUN 30779IIIYesEnvironmentally hazardous substance, solid, n.o.s. (MnSO₄·H₂O)

Handling and Storage Guidelines

  • Always wash hands before eating or drinking.

  • Provide ventilation to avoid dust buildup.

  • Store in a cool, dry location away from foodstuffs.

  • Avoid exposure to moisture.

Conclusion

By following the guidance in the SDS and applying proper protective measures, manganese sulfate can be handled safely in agriculture, industry, and research. Tables like those above allow workers and safety officers to access critical information quickly and effectively.

If you are sourcing high-quality manganese sulfate with full SDS support, ensure that your supplier provides updated documentation for compliance and workplace safety.

Related Products 

manganese dioxide supplier

manganese dioxide

manganese carbonate

manganese carbonate

manganese sand

manganese sand 

Related Posts

Where to Buy Feed-Grade Manganese Oxide in Bulk

Executive Summary Four channels supply feed-grade MnO in bulk: direct from the manufacturer, trading companies and agents, B2B platforms, and industry trade shows. The channel does not decide quality. The verification process after you find a supplier decides quality....

Feed-Grade Manganese Oxide Price: Cost Drivers, Ranges, and How to Read a Quote

Executive Summary Feed-grade MnO has no fixed price. It is set by manganese ore cost, reduction processing, heavy metal control, and market supply and demand — and it moves with the ore market. What matters more than the unit price is the cost per kg of elemental...

How to Compare Manganese Oxide Suppliers and Their COAs: A 3-Step Method

Executive Summary Compare MnO suppliers in three steps: normalize every quote to price per kg of elemental manganese, align all COAs to the same basis and metric, then score suppliers on quality, compliance, and supply. The winner is the supplier with a real,...

 12 Questions to Ask a Manganese Oxide Manufacturer Before a Bulk Order

Executive Summary Ask twelve questions in four categories: product specifications, quality documentation, capacity and lead time, and commercial terms. A manufacturer's answers — and how fast they come — separate real producers from risky sources before you spend a...

How to Choose a Reliable Manganese Oxide Supplier for Animal Feed: 5 Dimensions

Executive Summary Choose an MnO supplier on five dimensions: product capability, quality system, regulatory documentation, supply reliability, and commercial practice. A supplier failing two or more is not a price problem — it is a risk problem. Qualify first,...

Feed-Grade MnO COA: The 10 Items Every Certificate Must Have

Executive Summary A feed-grade MnO COA must carry ten items: lot number, production and test dates, MnO% and Mn% together, particle size, citric acid solubility, moisture, As/Pb/Cd values, test methods, sign-off, and company letterhead. Missing items are not a format...

Feed-Grade MnO Quality: How Mn Content, Purity, and Particle Size Work Together

Executive Summary Feed-grade MnO quality is a triangle: manganese content sets nutrient value, purity sets safety and availability, particle size sets mixing performance. All three come from the same production process. Weak on any one corner, the product fails. Mn...

Feed Grade vs. Industrial Grade Manganese Oxide: What’s Actually Different?

Executive Summary The difference is not manganese content. Feed grade and industrial grade MnO differ in heavy metal limits, particle size control, testing frequency, and traceability. Industrial grade is not produced or documented to feed-safety standards. Same...

Feed-Grade MnO Specifications: 8 Checks Before You Buy

Executive Summary Check eight specifications before buying feed-grade manganese oxide. A TDS missing any one of them deserves a follow-up question. MnO purity ≥ 60% and elemental Mn ≥ 46–47% — read both lines. Particle size 80–200 mesh, moisture ≤ 1.5%. Citric acid...

How to Choose the Right Grade of Manganese Oxide for Feed (5 Steps)

Executive Summary The right grade is the one that matches your line — not the highest number on the label. First gate: feed grade with As/Pb/Cd within limits. Industrial grade never enters feed. Purity band: 55%, 60%, or 62% MnO — compare on cost per kg of elemental...