Synthetic Manganese Dioxide for High-Performance Energy Storage
Short Product Description
Synthetic Manganese Dioxide for High-Performance Energy Storage is a high-purity electrochemical grade MnO₂ formulated for demanding battery and capacitor applications. With >99.5% active MnO₂ content and controlled particle size, it delivers reliable discharge performance and conductivity in alkaline and zinc-manganese systems.
Technical Specifications
| Specification | Typical Value | Unit |
|---|---|---|
| Active MnO₂ (as MnO₂) | 99.50–99.90 | % |
| Loss on Ignition (LOI) | ≤ 0.30 | % |
| Bulk Density | 0.70–0.95 | g/cm³ |
| Tap Density | 1.50–1.80 | g/cm³ |
| Particle Size (D50) | 5–15 | µm |
| Surface Area (BET) | 10–25 | m²/g |
| pH (10% slurry) | 6.5–8.5 | |
| Residual Chloride | ≤ 50 | ppm |
| Iron (Fe) | ≤ 0.02 | % |
| Lead (Pb) | ≤ 0.001 | % |
| Arsenic (As) | ≤ 0.0005 | % |
Other parameters can be adjusted per engineering requirements.
Key Features
High Electrochemical Activity: Engineered for high specific capacity and efficient electron transfer in primary and secondary batteries.
Consistent Quality & Purity: >99.5% active MnO₂ with low impurities ensures minimal side reactions and long shelf life.
Optimized Particle Size: Controlled D50 and narrow distribution improve packing density and uniform electrode coating.
Stable Physical Properties: Tight bulk/tap density control enhances processing and battery assembly consistency.
Low Residual Chlorides: Reduced corrosive species support cell stability and reduce electrolyte degradation.
Good Wettability: High surface area facilitates electrolyte penetration and charge acceptance.
Applications
Alkaline Batteries: Suitable for AA/AAA, C, D cell cathode mixes requiring high discharge performance.
Zinc-Manganese Oxide Cells: Ideal for primary zinc-manganese systems with high energy demand.
Rechargeable Systems: Applicable in select secondary battery formulations where chemical consistency is critical.
Electrochemical Capacitors: Supports high-rate charge/discharge cycles with stable capacitance.
High-Performance Energy Storage Modules: Used in industrial backup and specialty power systems requiring robust MnO₂ performance.
Packaging & Supply
Standard Packaging: 25 kg moisture-resistant kraft bags with inner PE liner.
Bulk Supply: FIBC (1,000 kg) or jumbo bags for large-volume procurement.
Export Ready: Wood-free pallets, stretch-wrapped, labeled per HS and UN chemical specifications for global shipments.
Inventory & Lead Time: Available stock with scheduled production to meet ongoing project demands.
Customization & Technical Support
Particle Engineering: Tailored particle sizes and surface area for specific electrode formulations.
Density Adjustment: Bulk and tap density tuning to match coating and pressing requirements.
Formulation Support: Application guidance for cathode mix ratios and process optimization.
Quality Documentation: Certificates of Analysis (CoA), TDS, MSDS, and custom compliance documentation available.
You can check out our full battery grade Manganese Dioxide solutions in here
You can also check out specifications for these applications:
Electrolytic Manganese Dioxide (EMD) for Alkaline Batteries
Battery Grade MnO2 9 1 % for Zinc-Carbon Cells
High Purity Chemical Manganese Dioxide (CMD) for Li-MnO2 Systems
Activated Manganese Dioxide for High-Drain Electronic Applications
EMD Powder for Primary Lithium Battery Cathodes
MnO2 for Magnesium-Manganese Dry Cell Production
Low Impurity Manganese Dioxide for Power Tool Batteries
MnO2 Nanoparticles for Next-Generation Supercapacitors
Manganese Dioxide Precursor for Lithium Manganese Oxide (LMO)